Panasonic NV-VP30EBL - Manual (Page 33)

Others Menu
Tape length
Sets the tape length of the cassette you use.
AUTO (
E - 240), E - 195, E - 260, E - 300
AV2
DECODER :
NORMAL : If a decoder is connected.
If another video recorder or satellite receiver is connected.
Selects the type of external unit connected to the VCR's AV2 21-pin
scart socket.
OSD
4:3 :
WIDE :
OFF :
Displays appear at the edge of the screen
(displays not visible on 16:9 format screens).
Displays appear at the edge of the screen
(displays appear in the middle on 4:3 format screens).
No on-screen displays
SQPB
AUTO :
ON :
OFF :
The VCR automatically detects the type of recording.
Plays back S-VHS format cassettes in quasi S-VHS format.
Plays back cassettes recorded in VHS format only.
EXT LINK
1 :
2 :
The VCR recording start and stop time is controlled by a
control signal sent via the 21-pin cable from the external
unit, for example Sky Digibox.
The VCR will start recording when AV2 input detects the
video signal and stop recording when the video signal is
switched off by the external unit.
Others
Tape length
Remote : VCR 1
EXT LINK : 2
: AUTO( E-240)
AV2 : DECODER
SQPB : AUTO
OSD : 4:3
VCR/DVD OUTPUT : AUTO
DVD
TV
VCR
: select
: return : exit MENU EXIT
!
!
!
!
!
! MENU
ENTER
MENU
Press
Select Others
Confirm with
Select the Menu item
Changes with
Press
to quit the menu.
Remote
You can set both the unit and the remote control unit to another
frequency by choosing VCR1 or VCR2 from the menu.
Press and hold remote control unit buttons
and or to set the
frequency channel of the relevant unit.
ENTER 1 2
VCR/DVD
OUTPUT
AUTO :
VCR/TV/DVD
MANUAL : VCR/DVD OUTPUT
When you press a function button the unit will activate the
relevant video or DVD output, depending on the setting of
the switch.
Press the button to manually toggle
between the video and DVD outputs.
33
VCR DVD