Before requesting service, Vcr distortions – Panasonic NV-VP30EBL User Manual

Page 59

Advertising
background image

The model no. and serial no. of this product are stuck down on the rear of the appliance.
Please enter them below to serve as reference.

Model No.
Serial No.

VCR DISTORTIONS

Before requesting service

Manual correction of a bad picture:

!

!

If you notice interference or a shift of the picture during normal, still or Slow Motion playback, press the

utton towards + or - to correct the picture.

Press + and - together to actuate automatic correction. Some video cassettes do not support tracking

control. This is not indicative of a malfunction.

TRACKING / V-LOCK b

The automatic clock does not
set correctly:

!
!

Set Clock set to AUTO (page 35).
Set Time and Date manually if the unit does not find a station emitting the time signal.

Bad picture or sound:

!

The use of E-300 cassettes may cause problems if the recordings were taken at slow tape speeds
(LP or EP).
Verify that the aerial and/or scart cables are attached and work properly.
Check the SQPB setting for S-VHS cassettes (page 33).
Please contact your service technician if the video heads are dirty or worn out.
Having a technical service shop clean the video heads is not covered by the guarantee

!
!
!

.

The recording functions do not
work properly:

!
!
!
!

!

If

flashes on the unit, check if the protection tab of the video cassette is still in.

Check the

menu (page 35).

Check the start and stop time of the timer programme (page 24).
Check if the

button has been pressed to put the unit into timer mode after programming a

recording (page 24).
Check the start and stop time of a

recording (page 26).

Clock set

PDC

TIMER

59

Advertising
This manual is related to the following products: