Pioneer RDS DEH-P40MP - Manual (Page 14)

Playing a CD
2 2 2 1 1 1
3
1 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2 Track number indicator
Shows the track number currently playing.
3 RPT indicator
Shows when repeat play is turned on.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
# You can eject a CD by pressing EJECT.
2 To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc. (Refer to Searching every 10 tracks in
the current disc on the next page.)
3 To skip back or forward to another
track, press c or d.
Notes
! Read the precautions with discs and player on
page 38.
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 38.
! When a CD TEXT disc is inserted, text informa-
tion currently selected on Using CD TEXT func-
tions on page 17 automatically begins to
scroll in the display.
Introduction of advanced
built-in CD player operation
% Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)
—RDM (random play)—
SCAN (scan play)
—PAUSE (pause)—COMP
(compression and BMX)
—FF/REV (search
method)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the frequency display.
Repeating play
Repeat play lets you hear the same track or
disc over again.
1 Press FUNCTION to select RPT.
2 Press c or d to select the repeat range.
! DSC – Repeat the current disc
! TRK – Repeat just the current track
Note
If you perform track search or fast forward/re-
verse during
TRK, the repeat play range changes
to DSC.
Built-in CD Player
En
14
Section
05