Pioneer RDS DEH-P40MP - Manual (Page 19)

Introduction of advanced
built-in CD player (WMA/
MP3/WAV) operation
% Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)
—RDM (random play)—
SCAN (scan play)
—PAUSE (pause)—COMP
(compression and BMX)
—FF/REV (search
method)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Repeating play
For WMA/MP3/WAV playback, there are three
repeat play ranges:
FLD (folder repeat), TRK
(one-track repeat) and DSC (repeat all tracks).
1 Press FUNCTION to select RPT.
2 Press c or d to select the repeat range.
! FLD – Repeat the current folder
! TRK – Repeat just the current track
! DSC – Repeat all tracks
Notes
! If you select another folder during repeat play,
the repeat play range changes to DSC.
! If you perform track search or fast forward/re-
verse during TRK, the repeat play range
changes to FLD.
! When FLD is selected, it is not possible to play
back a subfolder of that folder.
! If you select FLD and then return to the play-
back display, FRPT appears in the display.
Playing tracks in random order
Random play lets you play back tracks in a
random order within the repeat range,
FLD
and DSC.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select RDM.
3 Press a to turn random play on.
RDM :ON appears in the display. Tracks will
play in a random order within the previously
selected
FLD or DSC ranges.
# To turn random play off, press b.
Note
If you turn random play on during FLD and then
return to the playback display, FRDM appears in
the display.
Scanning folders and tracks
While you are using FLD, the beginning of
each track in the selected folder plays for
about 10 seconds. When you are using
DSC,
the beginning of the first track of each folder
is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on page 23.
2 Press FUNCTION to select SCAN.
3 Press a to turn scan play on.
4 When you find the desired track (or
folder) press b to turn scan play off.
SCAN :OFF appears in the display. The track
(or disc) will continue to play.
WMA/MP3/WAV Player
En
19
English
Section
06