Pioneer RDS DEH-P40MP - Manual (Page 20)

# If the display has automatically returned to
the playback display, select
SCAN again by press-
ing FUNCTION.
Notes
! After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
! If you turn scan play on during FLD and then
return to the playback display, FSCN appears
in the display.
Pausing WMA/MP3/WAV
playback
Pause lets you temporarily stop playback of
the WMA/MP3/WAV.
1 Press FUNCTION to select PAUSE.
2 Press a to turn pause on.
PAUSE:ON appears in the display. Play of the
current track pauses.
# To turn pause off, press b.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this unit. Each of the functions has a
two-step adjustment. The COMP function bal-
ances the output of louder and softer sounds
at higher volumes. BMX controls sound rever-
berations to give playback a fuller sound. Lis-
ten to each of the effects as you select
through them and use the one that best en-
hances the playback of the track or CD that
you are listening to.
1 Press FUNCTION to select COMP.
2 Press a or b to select your favorite set-
ting.
COMP OFF
—COMP 1—COMP 2—
COMP OFF
—BMX 1—BMX 2
Searching every 10 tracks in
the current folder
You can switch the search method between
fast forward/reverse and searching every 10
tracks. Selecting
ROUGH enables you to
search every 10 tracks.
1 Press FUNCTION to select FF/REV.
# If the search method ROUGH has been pre-
viously selected,
ROUGH will be displayed.
2 Press d to select ROUGH.
! FF/REV – Fast forward and reverse
! ROUGH – Searching every 10 tracks
# To select FF/REV, press c.
3 Press BAND to return to the playback
display.
4 Press and hold c or d to search every
10 tracks in the current folder.
# If the rest of track number is less than 10,
press and hold c or d recalls the first (last)
one.
Displaying text information
on WMA/MP3/WAV disc
Text information recorded on a WMA/MP3/
WAV disc can be displayed.
WMA/MP3/WAV Player
En
20
Section
06