Pioneer RDS DEH-P40MP - Manual (Page 22)

Playing a CD
3 3 3 2 2 2 1 1 1
4
You can use this unit to control a multi-CD
player, which is sold separately.
! Only those functions described in this man-
ual are supported by 50-disc multi-CD
players.
1 Disc number indicator
Shows the disc number currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 Track number indicator
Shows the track number currently playing.
4 RPT indicator
Shows when repeat range is selected to cur-
rent track.
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE until you see MULTI CD dis-
played.
2 Select a disc you want to listen to with
the 1 to 6 buttons.
For discs 1 to 6, press the corresponding but-
ton number.
For discs 7 to 12, press and hold the corre-
sponding numbers, such as
1 for disc 7, until
the disc number appears in the display.
# You can also sequentially select a disc by
pressing a/b.
3 To perform fast forward or reverse,
press and hold c or d.
4 To skip back or forward to another
track, press c or d.
Notes
! When the multi-CD player performs the pre-
paratory operations, READY is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner
’s
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
! When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, text information
currently selected on Using CD TEXT functions
on page 26 automatically begins to scroll in
the display.
Introduction of advanced
multi-CD player operation
% Press FUNCTION to display the function
names.
Press
FUNCTION repeatedly to switch be-
tween the following functions:
RPT (repeat play)
—RDM (random play)—
SCAN (scan play)
—ITS-P (ITS play)—PAUSE
(pause)
—COMP (compression and DBE)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Multi-CD Player
En
22
Section
07