Panasonic DMR-EZ28 - Manual (Page 17)

17
RQT9046
Basic OperationsBasic Operations
Recording Television Programs
Refer to “Important Notes for Recording” ( ➔ 20) and “Advanced Recording” ( ➔ 21 to 23) for detailed information on
recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
RAM If the disc is protected, release protection ( ➔ 44).
•
•
to turn the unit on.
“HELLO” appears on the unit’s display. –
;OPEN/CLOSE
to open the tray
(Button located on the upper front of the unit) .
Insert a disc with enough remaining blank space and press
[; OPEN/CLOSE] again to close the tray. –
to select desired channel.
Antenna Mode:
e.g. channel 4-2 Cable TV Mode:
e.g. channel 102-45
To select with the numbered buttons ( ➔ 15).
When no channel setting is performed on the unit and broadcast is
recorded directly from the cable box or satellite receiver, select a
channel on the connected equipment and press [INPUT SELECT]
to select “IN1” or “IN2”.
–
–
to select the recording mode.
Recording mode should be determined by program length and
available time on the disc (
➔ 21).
Recording mode Remaining time
–
to start recording.
REC
Pausing Recording
Press [h PAUSE].
Press again to restart recording. –
Stopping Recording
Press [g STOP].
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 62 and 63.
Notes
-R -R DL -RW(V) +R +R DL +RW
It takes about 30 seconds for the unit
to complete recording management
information after recording finishes.
You cannot change the channel or
recording mode during recording.
•
•