Panasonic DMR-EZ28 - Manual (Page 46)

46
RQT9046
“Accessing the Setup Menus”
You will have to perform the following step 1 for all
other operations on pages 46-55.
With the unit stopped
Notes
Changed settings remain intact even when switching the unit to standby.
Tips
To return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is
not activated until you press [OK].
To exit the screen
Press [SETUP].
Set Channels Automatically
The channels are automatically set.
Select to suit the type of antenna you are using.
Perform step 1 of “Accessing the Setup Menus” (
➔ above).
e, r to select “Channel” then q
e, r to select “Set Channels
Automatically”, then
e, r to select “Antenna” or “Cable”,
then
When a TV (VIERA) supporting HDAVI
Control 3 is connected via an HDMI cable,
the following options will be displayed.
[Set Channels via VIERA Link] You can
acquire the VIERA setting information.
[Set Channels without VIERA Link]
–
to complete.
Set Channels Manually
The captions you select or modify are used as channel
names and displayed on the Direct Navigator screen.
Perform step 1 of “Accessing the Setup Menus” ( ➔ above).
e, r to select “Channel”, then q
e, r to select “Set Channels
Manually”, then
e, r to select channel.
You can also select channels with the
numbered buttons.
You can also press [u, i] to skip several lines. –
–
Adding and Deleting Channels
To add channels, delete undesired channels, or
channels that have poor reception.
After selecting a channel (
➔ left, step 4, “Set Channels
Manually”)
w, q to select the “Add/Del” column.
e, r to select “Added” or “Deleted”.
After selecting the “Channel” column with
[w, q], repeat steps 4-6 to set other channels. –
Setting favorite channels
You can define a Favorite list.
After selecting a channel (
➔ left, step 4, “Set Channels
Manually”)
w, q to select the “Favorite” column,
then
e, r to select the position on the
list, then
After selecting the “Channel” column with
[w, q], repeat steps 4-6 to set other channels. –
to complete.
Selecting the caption
After selecting a channel ( ➔ left, step 4, “Set Channels
Manually”)
w, q to select the “Caption” column.
e, r to select the caption.
After selecting the “Channel” column with
[w, q], repeat steps 4-6 to set other channels. –
Setup Menus