Panasonic DMR-EZ28 - Manual (Page 49)

49
RQT9046
Setting Men
us
Tips
To cancel in the middle
Press [RETURN].
Set Clock Manually
After selecting “Clock Settings” ( ➔ 48, step 3)
e, r to select “Set Clock Manually”,
then
w, q to select the item you want to change.
e, r to change the setting.
to confirm new date and time
and to initiate the clock.
Set the time change dates for DST
Set the beginning and end dates for DST ( ➔ 13).
Adjust Time Zone
Adjust the time zone (–1 or 1) if it was not set correctly
with auto clock setting. You can set this menu only after
“Set Clock Automatically” is completed ( ➔ 48).
After selecting “Clock Settings” ( ➔ 48, step 3)
e, r to select “Adjust Time Zone”,
then
e, r to select “–1” or “1”, then
Quick Start
1 Sec. Quick Start for Recording on DVD-RAM. From the
power off state, recording on DVD-RAM starts about 1 second
after first pressing [^ DVD POWER] and then sequentially
pressing [* REC] (Quick Start Mode). Power consumption is
also higher when the unit is turned off if this is set to “On”.
Perform step 1 of “Accessing the Setup Menus” ( ➔ 46).
e, r to select “Setup”, then q
e, r to select “Quick Start”, then
e, r to select “On” or “Off”, then
DivX Registration
You need this registration code to purchase and play
DivX Video-on-Demand (VOD) content ( ➔ 29).
Perform step 1 of “Accessing the Setup Menus” ( ➔ 46).
e, r to select “Setup”, then q
e, r to select “DivX Registration”,
then
Restore Default Settings
This returns Setup menus to default settings, except
for the clock, channel settings, ratings level, closed
caption, and on-screen language.
Perform step 1 of “Accessing the Setup Menus” ( ➔ 46).
e, r to select “Setup”, then q
e, r to select “Restore Default
Settings”, then
e, r to select “Yes” or “No”, then
Settings for Playback
Perform step 1 of “Accessing the Setup Menus” ( ➔ 46).
e, r to select “Disc”, then q
e, r to select “Settings for
Playback”, then
Ratings
Set a ratings level to limit DVD-Video play.
Follow the on-screen instructions. Enter a 4-digit
password with the numbered buttons when the
password screen is shown.
After selecting “Settings for Playback” (
➔ above, step 3)
e, r to select “Ratings”, then
e, r to select ratings limit, then
Enter a 4-digit password, then
Do not forget your password. –
Setting ratings (When level 8 is selected)
[8 No Limit] All DVD-Video can be played.
[1] to [7]
Prohibits play of DVD-Video with
corresponding ratings recorded on them.
[0 Lock All] Prohibits play of all DVD-Video.
Changing ratings (When level 0 to 7 is selected)
[Unlock Recorder] [Change Password] [Change
Level] [Temporary Unlock]
•
•