Setup menus, User menu, Video – Panasonic AJ-HD150 User Manual
Page 68
– 68 –
Setup menus
USER menu
<VIDEO>
(continued)
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
624
DC ENH
0000
0dB
HV
0001
+3dB
0002
+6dB
625
UC ENH
0000
0dB
HV
0001
+3dB
0002
+6dB
650
Y LEVEL
0000
0000
:
:
4000
4000
:
:
5A70
5A70
651
PB LEVEL
0000
0000
:
:
4000
4000
:
:
5A70
5A70
652
PR LEVEL
0000
0000
:
:
4000
4000
:
:
5A70
5A70
653
BK LEVEL
0
–15.0%
:
:
150
0%
:
:
300
15.0%
672
V OUT
0000
THRU
SETUP
0001
ADD
(SD)*
1
673
EDH
0000
OFF
(SD)*
1
0001
ON
674
ESR MODE
0000
OFF
(SD)*
1
0001
AUTO
675
CCR MODE
0000
OFF
(SD)*
1
0001
ON
The underline on the setting item denotes the initial setting.
This selects the horizontal and vertical outline enhancement
during down-conversion.
This selects the horizontal and vertical outline enhancement
during up-conversion.
This is for adjusting the Y level (- to 0 dB to +3 dB).
dB=20 log (N/4000 hex)
This is for adjusting the PB level (- to 0 dB to +3 dB).
dB=20 log (N/4000 hex)
This is for adjusting the PR level (- to 0 dB to +3 dB).
dB=20 log (N/4000 hex)
This is for adjusting the black level.
This selects the composite output signal.
0: The signal is output with no setup added.
1: The signal is output with a 7.5% setup added.
This selects whether EDH is to be superimposed onto SERIAL
OUT.
0: EDH is not superimposed.
1: EDH is superimposed.
This selects the edge subcarrier reduction (ESR) operation
mode in the playback circuitry.
0: ESR is forcibly set to OFF.
1: ESR is automatically set to ON or OFF depending on the
VTR operation.
This selects the processing for cross color during playback.
0: The cross color is output as is.
1: The cross color can be reduced.
Setup menus
<Note>
Setup menu items
No.624 and 625 do not
work if the AJ-
UDC150P optional
board has not been
installed.
*
1
: With the SD output (SD tape playback or down-conversion output)