Panasonic AJ-HD150 - Manual (Page 99)

– 99 –
Specifications
GENERAL
Power supply: AC 120 V, 50 – 60 Hz
Power consumption: 230 W
Operating ambient temperature: 41°F to 104°F (5°C to 40°C)
Operating ambient humidity: 10% to 90% (no condensation)
Weight: 44 lbs (20 kg)
Dimensions (W
×
H
×
D): 16-3/4"
(
max. 17-3/16"
) Ч
6-15/16"
Ч
17-11/16"
(Not including the support legs, connectors, JOG dial and fan)
Recording format: DVCPRO HD
Recording video signal: 1080i, 59.94 Hz/60 Hz selectable
Recording audio signal: 48 kHz, 16 bits, 8 channels
Recording tracks: Digital video/audio: helical track
The time code is recorded in the sub-code area.
Cue track: 1 track
Control track: 1 track
Tape speed: 135.28 mm/sec
Recording time: 46 minutes (using the AJ-HP46LP)
32 minutes (using the AJ-HP32LP)
Tape: Metal tape
FF/REW time: Approx. 1 min (with AJ-HP46LP)
Search speed: ±50
×
speed (color)
Digital slow: Plus direction: 1
×
speed
Minus direction: –1
×
speed
Editing accuracy: ±0 frames (using the time code)
Tape timer accuracy: ±1 frame (using the continuous CTL signal)
Servo lock time: Less than 0.3 sec (standby ON)
Loading time: Approx. 3 sec
Audio split editing: YES
VIDEO
Sampling frequencies: Y: 74.25 MHz, P B /P R : 37.125 MHz
Quantizing: 8 bits
Video compression method: DCT + variable length code
Video compression rate: 1/6.7
Error correction: Reed-Solomon product code
Video recording bit rate: 100 Mbps
Sample
×
effective line: 1280
×
1080/frame
Video banwidth Y: 20 MHz
P B /P R : 10 MHz
Video input connector
HD serial digital input:
BNC
×
1, complies with SMPTE 292M standard
HD reference input: BNC
×
2, loop-through, 75
Ω
on/off
SD reference input: BNC
×
2, loop-through, 75
Ω
on/off
SDTI input (option): BNC
×
1, complies with SMPTE 305M/321M standard
Video Output Connector
HD serial digital output:
BNC
×
3, complies with SMPTE 292M standard
OUT3 (superimpose on/off)
Serial digital component output: BNC
×
3, complies with SMPTE 259M-C/294M standard,
OUT3 (superimpose on/off)
HD reference output: BNC
×
1
SD reference output: BNC
×
1
Analog composite output: BNC
×
3, video 1, video 2 (WFM OUT), video 3 (superimpose on/off)
Output during SD playback or when the down-converter is installed
SDTI output (option): BNC
×
1, complies with SMPTE 305M/321M standard
Video Signal Adjustment
HD SDI Y output gain:
– ¶ to +3 dB
HD SDI P B output gain: – ¶ to +3 dB
HD SDI P R output gain: – ¶ to +3 dB
HD SDI Y black level: ±10%