4 permitted hosts tab, 1 adding a host, 2 changing a host – Psion Teklogix Vehicle-Mount Computer 8515 User Manual
Page 140: Changing a host, 1 adding a host 5.18.4.2 changing a host
Chapter 5: Configuration
Permitted Hosts Tab
120
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
•
Tap on the Remove button.
A Delete Confirmation screen is displayed.
•
To remove a destination, tap on Yes, or
•
If you decide not to remove the destination, tap on No.
5.18.4 Permitted Hosts Tab
For security reasons, the Network Administrator may want to restrict SNMP-node access to
a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Man-
agers which are allowed to monitor and manage this device. If no entries are listed, the
device will accept SNMP queries from any host.
Figure 5.79 Permitted Hosts Options
5.18.4.1 Adding A Host
•
To add a new host, tap on the Add button.
Figure 5.80 Add IP Address Dialog
•
Type a new host IP address in the text box provided, and press [ENTER].
5.18.4.2 Changing A Host
To change an existing host IP address: