Psion Teklogix Vehicle-Mount Computer 8515 User Manual
Page 151
Chapter 6: Peripheral Devices & Accessories
Preparation
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
131
Figure 6.5 Tightening Tool P/N 9000594
The mounting platform on which you secure the vehicle-mount must be strong enough to
support 25 kg. Never attach the mount to a plastic dash or a wooden platform without the ap-
propriate backing plate and bracing. When selecting a mounting location, you must provide
the operator access at the top, bottom, and sides.
Important: The tilt and rotation of the cradle can be easily adjusted by the operator.
Ensure that if the handscrew is loosened and the cradle slips, the operator
and any equipment cannot be damaged by it. Also note that under extreme
vibration, the mount may slowly ‘settle’, requiring readjustment and tight-
ening of the handscrew. Psion Teklogix offers a tightening tool (P/N
9000594) which can be used to minimize settling.