1 ram vesa base, 2 ram circular base, Ram vesa base – Psion Teklogix Vehicle-Mount Computer 8515 User Manual
Page 153: Ram circular base, 1 ram vesa base 6.4.4.2 ram circular base
Chapter 6: Peripheral Devices & Accessories
Installation
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
133
Figure 6.7 Mounting Bracket Attached To The 8515
2. Secure the RAM Base to the local platform and attach RAM Standard Arm:
Use the supplied bolt hole pattern to drill the required holes in the local platform.
Hole diameters must not exceed 10mm [13/32 inches]. Hardware (G, H, C, and J)
for securing RAM Bases (B or F) to the local platform are in the recommended
sizes (see
). If replacement hardware is required, it should be
consistent with these diameters. All fasteners must use a suitable locking mecha-
nism to ensure that they do not loosen under shock and vibration.
• If you are assembling with the RAM Vesa Base, see
.
• If you are assembling with the RAM Circular Base, see
6.4.4.1 RAM Vesa Base
. In four places, insert screw (G) through the RAM Vesa Base
(B), the local platform and the washer (C). Affix with nut (J). Torque to 26 in-lbs. Secure
RAM Standard Arm (E) by inserting RAM Balls into both ends of arm sockets.
6.4.4.2 RAM Circular Base
. In four places, insert screw (H) through the RAM Circular Base
(F), the local platform and the washer (C). Affix with nut (J). Torque to 26 in-lbs. Secure
RAM Standard Arm (E) by inserting RAM Balls into both ends of sockets.