Powerware FCC 15 - Manual (Page 9)

INSTALLING THE MODBUS CARD
EATON Powerware ® Modbus ® Card User’s Guide S 164201376 Rev C www.powerware.com 5
3. Change the J9 and J10 jumpers to the desired setting as shown in
Figure 4.
1
1
J11
2 3 4 5 6
O N
S2
J7 J8
J10
J9
J9
J10
Four-Wire
1
1
J9
J10
Two-Wire
(Default)
1
1
Figure 4. Modbus Card Jumpers
4. Reinstall the Modbus Card into the Powerware Expansion Chassis.
Align the Modbus Card with the slot guides and slide the card into
the slot until it is firmly seated.
Secure the Modbus Card with the screws removed in Step 2.