Planet Technology WDAP-2000PE - Manual (Page 12)

If you can't connect:
It is likely that your PC’s IP address is incompatible with the WDAP-2000PE’s IP
address. The default IP address of the Wireless Access Point is 192.168.1.1, with a
Network Mask of 255.255.255.0.
If your PC’s IP address is not compatible with this, you must change your PC’s IP
address to an unused value in the range 192.168.1.2 ~ 192.168.1.254, with a
Network Mask of 255.255.255.0.
3.3 Setup Wizard
The setup wizard helps you to configure the basic settings of WDAP-2000PE in four steps.
3.3.1 Time Settings
The time of WDAP-2000PE is automatically synchronized to the local time of the management
PC at the first time a connection is made. To modify the device’s time, select desired setting for
each field. Click “NEXT” to proceed.
Enable NTP You can enable the NTP function and configure the server name/IP-
address of the NTP server you want to use. Once NTP is enabled, the
system will set its own date/time to the value returned fromthe NTP
server.
Local time
zone/date and
time
Please choose the time zone according to your location and set the data
and time.
3.3.2 Device IP Settings
You can manually configure the IP settings to WDAP-2000PE, or use DHCP client protocol to
obtain IP address automatically. Click “NEXT” to proceed.
10