2 802.1x authentication setup – Planet Technology WDAP-2000PE User Manual
Page 46
Advertising
8. . You will receive a confirmation message. Click Yes.
9. Certificate setup is now complete.
4.6.2 802.1x Authentication Setup
1. Open the properties for the wireless connection, by selecting Start - Control Panel
- Network Connections.
2. Right Click on the Wireless Network Connection, and select Properties.
3. Select
the
Authentication Tab, and ensure that Enable network access control
using IEEE 802.1X is selected, and Smart Card or other Certificate is selected
from the EAP type.
44
Advertising