6 wireless settings – Planet Technology WDAP-2000PE User Manual
Page 25
Select security policy
Configure the security policy for the SSID.
3.5.6 Wireless Settings
Beacon interval
The WDAP-2000PE broadcasts beacon frames regularly to
announce its existence.
Default is 100, i.e., ten beacons per
second. Decreasing the beacon interval makes passive
scanning more reliable and faster. Increasing the beacon
interval may improve throughput by decreasing contention
for the medium.
RTS threshold
RTS/CTS frames are used to gain control of the medium for
transmission.
If there are heavy traffic from many stations,
decrease RTS threshold will reduce collision.
The RTS
threshold should have a value between 256-2347 bytes, with a
default of 2347. It is recommended that this value does not
deviate from the default too much.
23