PSC PT Program Generator - Manual (Page 102)

PT40 Communication
90
PT Program Generator (PPG) v5.0
• The PSC Portable Compiler window appears momentarily as
PPG compiles the program, translating it into a language
understood by the portable.
Figure 60. PSC Portable Compiler Window
• The original *.scr file remains intact, and the compiled file is
given the same name, but with a *.hex extension. It is this
*.hex file that is downloaded into the portable.
• When compilation is complete, the PPGXFER window opens,
displaying the message Initiating Download .
• If a connection between the PC and the PDT is successfully
established, the window shows further messages as the compiled
*.hex file is loaded into the portable. Refer to
What Happens
During a Download? on page 91 for more information.
• When downloading is complete, you'll see the message Portable
successfully programmed in the PPGXFER window, and your
application’s initial window appears in the portable’s display.
Figure 61. PPGXFER Window
6. Double-click on the PPGXFER window's Control Menu box or select File
> Exit to close the PPGXFER window.
2342.book Page 90 Thursday, July 22, 2004 8:35 AM