PSC PT Program Generator - Manual (Page 85)

Creating New Nodes
User’s Guide
73
Figure 51. Call Node Properties Dialog
Call Subroutine
Click on the down-arrow button to the right of the input box to display a list
of all subroutines within the program. Select the subroutine you want to Call ,
and then select OK .
A Call to a subroutine executes the specified subroutine and then returns to the
node following the Call node.
Links
Creating Links
Links are arrows that connect frames and nodes, directing the program to the
next step. A Link pointing to a frame or node shows how it is accessed. A Link
pointing away from a frame or node shows where the program goes next.
To create a Link, complete the following steps:
1. Select Create > Link from the menubar or press the Link button from
the Program Nodes toolbar.
2. Position your cursor (the Link) on the initiating node, click and hold
down the left mouse button, and drag your cursor (the Link) on to
the
Next Node . Release the Link. The Link is drawn using the middle
of each object as an axis, regardless of the exact position of the pointer.
2342.book Page 73 Thursday, July 22, 2004 8:35 AM