Ppgxfer error messages – PSC PT Program Generator User Manual

Page 188

Advertising
background image

Troubleshooting

176

PT Program Generator (PPG) v5.0

PPGXfer Error Messages

Table 8. PPGXFER Error Messages

Error with <source file
name>

An error occurred while reading the source file. Make sure
you selected the correct source file. Open the file with PPG
and verify that it appears as expected. If the message per-
sists, contact PSC Technical Support for assistance.

Your program may have too many nodes in a frame or have
too many fields defined in a template.

The application may be too large or complex for the available
memory in the compiler. Using PPG, modify your application
to make it smaller and try compiling again.

Language not supported

This version of PPGComp does not support the selected lan-
guage. Contact PSC Technical support for assistance.

Syntax Error in <node
name>(line <line #>)

This message indicates an error in the source file. It usually
means that some required information is missing. Determine
which node is the problem, open the application with PPG,
locate the problem node and view its properties. Make sure
all required options are selected. Save the application and
select File->Download to compile and download the applica-
tion.

Error Messages

Description

Application is too large to
load, it must be < FFFFH.

The application is too big to be stored on the PDT. The down-
load cannot be completed. Using PPG, modify your applica-
tion to make it smaller and try downloading again.

Buffer allocation error

This error occurs when insufficient memory exists to run
PPGXfer. Close other applications and try again. If no other
applications are open, you may need to reboot your PC
before trying again.

Error opening hex file

This error indicates that the selected hex file could not be
opened. Make sure that the file exists and it is not currently
being used by another application

NAK received -

Re-sending.

This error indicates that PPGXfer received an unexpected
response from the PDT. PPGXfer will try again without any
further action from the user.

Error Message

Description

2342.book Page 176 Thursday, July 22, 2004 8:35 AM

Advertising