PSC PT Program Generator User Manual
Page 126
PPG Tutorial
114
PT Program Generator (PPG) v5.0
Create nodes for the
Collect Data
frame by completing the following steps:
1. If you're returning from a break after exiting PPG, double-click on
the PPG icon in the PT Program Generator. Then choose
File > Open
and select tutorial.scr from the file list. Select
OK
to load the file into
the PPG window.
2. At the Program level, double-click the
Collect Data
frame to access its
contents. Because this frame has two Links (one to it and one from
it), there are two nodes initially created:
Start: Collect Data
and
Exit:
Main Menu
. Position these nodes so that the Entry node is in the
upper left corner and the Exit node is at the bottom right.
Figure 84. The Collect Data nodes
2342.book Page 114 Thursday, July 22, 2004 8:35 AM