PSC PT Program Generator - Manual (Page 121)

Building a Custom Portable Program
User’s Guide
109
Figure 79. Flow Chart showing Jointed Links
Creating the Main Menu Nodes
After defining program’s frames, you must specify the nodes for each frame.
Operation nodes involve more detailed information than frames and are
divided into nine node types, with a different dialog box associated with each
node. For example, a
Display node specifies text to display on the portable’s
screen; that text is entered into a dialog box attached to the node.
In this section, you will set up the nodes for the Main Menu frame. This is a
simple frame, creating a path to either of the other two frames. You will create
a
Menu node that advances to the Collect Data frame if the user presses <F3>
and to the Upload Data frame if the user presses <F4> .
Set up the nodes for the Main Menu frame by completing the following steps:
1. Double-click the Main Menu frame. A second window opens showing
three boxes: Start: Main Menu, Exit: Collect Data , and Exit: Upload
Data . These nodes are created automatically by the Links you set up
and they offer entry to and exit from the Main Menu nodes.
To view the a frames’ nodes, double-click on it. Or highlight the frame and select View
> Show Frames/Subroutines from the menubar.
2342.book Page 109 Thursday, July 22, 2004 8:35 AM