Peerless Industries KX-TDA15 - Manual (Page 126)

1.10 Conversation Features
126 Feature Guide
1.10.9 Parallelled Telephone
Description
Multiple telephones can be connected to the same port. This is useful to increase the number
of telephones without additional extension cards. The combinations and features of the
parallelled telephones are described below.
Features Descriptions Connections
Parallel
Mode Parallel connection allows the connection of an
SLT to an APT or a DPT that is connected to a
Super Hybrid port.
When parallel mode is enabled, the two
telephones function as follows:
• Both share one extension number
(main telephone’s extension number).
• Either telephone can make or answer
a call.
• If one goes off-hook while the other is
on a call, the call is switched to the
former.
EXtra Device
Port (XDP)
Mode XDP mode can be used when the main
telephone in a parallel connection is a DPT
connected to a Super Hybrid port.
Unlike parallel mode, each telephone can act
as a completely different extension with its own
extension number. (
2.1.1 Extension Port
Configuration)
Digital XDP The Digital XDP allows two DPTs to be
connected together when one of them is
connected to the following port:
• a DPT or Super Hybrid port (with the
KX-TDA30/KX-TDA100/KX-TDA200)
• a Super Hybrid port (with the KX-
TDA15)
The DPT that is connected directly to the PBX
is called the "master DPT", and the DPT
connected to the master is the "slave DPT".
Like XDP mode, each telephone can act as a
completely different extension with its own
extension number.
In addition to a slave DPT, the master DPT
(connected to a Super Hybrid port) can have an
SLT in parallel or XDP mode.
PBX
APT/DPT + SLT
SLT DPT
Extn. 101 Extn. 101
APT
Extn. 102 Extn. 102
SLT
DPT + SLT
PBX
SLT DPT
Extn. 101 Extn. 105
PBX
DPT + DPT
DPT
Extn. 101 Extn. 201
DPT
Master Slave
PBX
DPT
Extn. 101 Extn. 201
SLT
Extn. 101 (in Parallel Mode)
or
Extn. 105 (in XDP Mode)
DPT
Master Slave
DPT + DPT + SLT
Deleted: the