Peerless Industries KX-TDA15 - Manual (Page 164)

1.17 Caller ID Features
164 Feature Guide
• For an SLT that is connected to a DPT in parallel, Caller ID information is available only
when the SLT is set to "ring".
• Even if the caller’s name is sent, the name may not be shown depending on the type of
SLT.
• Incoming Call Log information is not shown on the SLT.
Feature Guide References
1.6.1.5 Speed Dialling—Personal/System
1.25.1 Station Message Detail Recording (SMDR)