Peerless Industries KX-TDA15 - Manual (Page 309)

2.3 System Data Control
Feature Guide 309
[Fixed Numbering Table (available while dialling or talking)]
Conditions
• The PBX has default for numbers.
• The following are examples of feature number conflicts: 1 and 11, 0 and 00, 2 and 21, 10
and 101, 32 and 321, etc.
• Feature number + Additional number (Parameter)
Some flexible feature numbers require additional digits to make the feature active. For
example, to set Call Waiting, the feature number for "Call Waiting" must be followed by "1"
and to cancel it, the same feature number should be followed by "0".
• If a feature number includes " " or "#", rotary SLT users cannot use it.
• ISDN extension users cannot use the following features:
• PS users cannot use the following features:
User Manual References
User Manual
4.2.1 Feature Number Table
Feature Fixed
Numbering
Pulse to Tone Conversion
Conference 3
Door Open 5
– OGM playback/record
– Call Hold/Call Hold Retrieve (held at its own extension)
– ISDN Hold
– MCID
– Walking Extension
– Call Waiting
– Hot Line
– Timed Reminder
– Executive Busy Override
– Call Monitor
– Automatic Callback Busy/CCBS
– Personal Speed Dialling
– OGM playback/record
– S-CO Line Access
– Parallel Telephone Mode set/cancel
– Walking Extension
– BGM set/cancel
– Timed Reminder