Peerless Industries KX-TDA15 - Manual (Page 217)

1.23 Voice Mail Features
Feature Guide 217
Time mode (day/lunch/break/night) of the preprogrammed tenant is applied to the DID
destination and company greeting number.
8. Caller’s Identification Notification to the VPS
When receiving a trunk call, the PBX sends the caller’s identification number/name to the
VPS.
9. DID Number Notification to the VPS
When receiving a trunk call with a DDI/DID number or an MSN, the PBX sends the DDI/
DID number or MSN to the VPS. The number will be sent to the VPS even if the call
reaches the VPS after redirection by, for example, the Intercept Routing feature.
10. Status Notification to the VPS
After the call is redirected by the VPS, the PBX sends the status of the redirected
extension (e.g., busy) to the VPS.
11. Paging by the VPS
The VPS can perform the Paging feature using the recorded message. ( 1.14.1 Paging)
12. Live Call Screening (LCS)
PT and PS users can monitor his own mailbox while a caller is leaving a message and, if
desired, answer the call by pressing the LCS button. When the caller is leaving a message
in the mailbox, monitoring can be carried out in two ways: each PT user can choose which
through personal programming (Live Call Screening Mode Set). PS users cannot choose
the way: only Private mode is available for them.
Hands-free mode: The user can monitor the call automatically through the built-in
speaker.
Private mode: The user will hear an alarm tone. To monitor the call, the user goes off-
hook with the handset, MONITOR button, or SP-PHONE button. However, PS users
cannot monitor the call with the speakerphone.
PBX
Tenant 1
123-4567
(Company A)
Tenant 3
(Company B)
Trunk Call
Extn. 105 Extn. 102
VPS
(Floating Extn. No.100)
Intercept
123-2468
Trunk Call
Sends the following information:
· VPS Trunk Group: 1
· Time mode: Day
Sends the following information:
· VPS Trunk Group: 2
· Time mode: Night