24 portable station (ps) features, 1 portable station (ps) connection, Description – Peerless Industries KX-TDA15 User Manual

Page 220: Conditions

Advertising
background image

1.24 Portable Station (PS) Features

220

Feature Guide

1.24 Portable Station (PS) Features

1.24.1 Portable Station (PS) Connection

Description

This PBX supports the connection of a PS (e.g., KX-TD7590, KX-TD7690). It is possible to use
the PBX features using the PS like a PT.

Conditions

The PS registration is required through the system programming (

PS Registration

[690]). To avoid unexpected registration to another PBX, the Personal Identification
Number (PIN) for the PBX is necessary to register a PS (

Personal Identification

Number (PIN) for PS Registration [692]). The registration can be cancelled (

PS

Termination [691]).

Handover
Even if a PS user moves during a conversation, the PS will automatically switch between
cells without disconnecting the call (Handover).
Handover is available in any of the following cases:

a)

During a conversation with an extension or outside party.

b)

While a call is ringing at the PS.

c)

While the PS is in idle status.

On the contrary, Handover is not available in one of the following cases:

a)

When the new (Handover) CS is busy.

b)

When there is no CS within range.

c)

While the Live Call Screening (LCS) or Two-way Record is activated (

1.23.3 Voice

Mail DPT (Digital) Integration).

d)

While the PS user is paging other extensions (

1.14.1 Paging).

e)

During a doorphone call (

1.16.1 Doorphone Call).

f)

While the PS user is dialling digits to make a trunk call.

g)

During a conversation with an extension using PC Console or PC Phone, to which the
conversation is being recorded.

When a caller has dialled the extension number of a PS but the CS is busy, the caller hears
a busy tone.

PBX

CS

Handover:
Calls will not be
disconnected.

CS

CS

Interface

Advertising
This manual is related to the following products: