Peerless Industries KX-TDA15 - Manual (Page 234)

1.25 Administrative Information Output Features
234 Feature Guide
Conditions
• SMDR Format
The following SMDR format can be set through system programming in order to match the
paper size being used in the printer:
a) Page Length: determines the number of lines per page ( SMDR Page Length
[802]).
b) Skip Perforation: determines the number of lines to be skipped at the end of every
page (
SMDR Skip Perforation [803]).
The page length should be at least four lines longer than the skip perforation length.
Explanation:
• The SMDR data is not deleted even if the PBX is reset.
• If the PBX is reset during a conversation, the call will not be recorded on the SMDR.
• The following calls are regarded as two separated calls in the SMDR:
Secret dialling Controls secret dialling. If enabled, the dialled number will be
shown as dots.
This setting is effective only when the modified number is
selected in ARS dial setting above. If the user-dialled number
is selected in ARS dial setting, the dialled number will be
shown as dots regardless of this setting.
Privacy dial Enables or disables privacy dial. If enabled, the last four digits
of the dialled telephone number and any additional digits after
connection will be shown as "X". (e.g., 123-456-XXXX)
Date order The date order is changeable: month/day/year, day/month/
year, year/month/day, year/day/month.
Received call Controls whether the time of receiving an incoming trunk call
is shown.
Answered call Controls whether the time of answering an incoming trunk call
is shown.
– Calls before and after the flash/recall/EFA signal is manually sent during a
conversation
– Trunk-to-trunk calls by Call Transfer, FWD or DISA (recording each as "incoming
call" and "outgoing call")
Item Description
Skip
Perforation
Page
Length
Machine
Perforation