Peerless Industries KX-TDA15 - Manual (Page 167)

1.18 Message Features
Feature Guide 167
1.18 Message Features
1.18.1 Message Waiting
Description
An extension user can notify another extension user that he wishes to talk to the user. The
notified extension user can return the call or listen to the messages left in his mailbox of the
VPS.
When a message is left on a PT, the Message button on it lights or the Message/Ringer Lamp
on it turns on red. Pressing the lit Message button while on-hook shows the caller’s information
as shown below:
[Example]
Conditions
• Message Button
A flexible button can be customised as the Message button for the extension, other
extensions, or an incoming call distribution group.
• Distinctive Dial Tone for Message Waiting
If the Distinctive Dial mode is enabled, dial tone 4 will be sent to an extension when a
message has been left on the extension. (
1.27.1 Dial Tone)
• SLT with a Message Waiting Lamp (KX-TDA100/KX-TDA200 only)
The lamp activates in the same way as the MESSAGE button on a PT, if an MSLC card is
connected to the PBX. The Message Waiting Lamp light pattern can be selected from the
twelve patterns shown below. System programming for each extension port is required to
use this feature.
105:Tom Smith --- Extension no. and name of who left the message
Own extension
Other extension*
*: For example, this button is useful
when the secretary checks the
message for the boss (Boss &
Secretary Feature).
Incoming call distribution group
Message buttons