Peerless Industries KX-TDA15 - Manual (Page 29)

1.1 Incoming Call Features
Feature Guide 29
1.1.1.6 Intercept Routing
Description
Provides automatic redirection of incoming trunk calls. There are two types of Intercept Routing
as follows:
The available intercept destination is as follows:
Type 1: The destination assigned on the extension port which the original destination joins.
( Extension Intercept Destination [604])
Type 2: The destination assigned on the trunk group which receives the call.
( Trunk Group Intercept Destination [470])
Feature Description
Intercept Routing—No
Answer (IRNA) If a called party does not answer a call within a preprogrammed
time period (Intercept time) (
Intercept Time [203]), it is
redirected to the preprogrammed destination.
Intercept Routing—
Busy/DND If a called party is busy or in DND mode, the call is redirected to
the preprogrammed destination.
Original Destination The Available Intercept Destination
Wired Extension (PT/SLT/ISDN
Extension/T1-OPX) Type 1
PS Type 1
Incoming Call Distribution Group Intercept Routing—Overflow in an Incoming Call
Distribution Group works (
1.2.2.5 Overflow
Feature). The overflow destination is assigned on
the incoming call distribution group which the
original destination joins (
Destination for
Overflow Time Expiration [625]).
PS Ring Group Type 2
VM Group (DTMF/DPT) Type 2
External Pager (TAFAS) Type 2
DISA Type 2*
Analogue/ISDN Remote
Maintenance Not available
Idle Line Access no. + Phone no. Not available
Trunk Group Access no. +
Trunk Group no. + Phone no. Not available
Other PBX Extension (TIE with no
PBX Code) Not available
Other PBX Extension (TIE with PBX
Code) Not available