Peerless Industries KX-TDA15 - Manual (Page 290)

2.2 System Configuration—Software
290 Feature Guide
2.2.4 Time Service
Description
This PBX supports day, night, lunch, and break modes of operation. TRS/Barring can be
arranged separately. The destination of incoming calls can be set differently for each mode.
1. Time Service Switching Mode
Day/lunch/break/night mode can be switched either automatically or manually ( Time
Service Switching Mode [101]). The switching mode can be assigned for each tenant.
The switching mode can also be changed by pressing the Time Service Switching Mode
(Automatic/Manual) button. This can be performed by only an extension assigned as the
manager, or preprogrammed extension on a COS basis (
Time Service Manual
Switching [514]).
Even while in the Automatic Switching mode, day/lunch/break/night mode can be changed
manually.
2. Time Table
Each tenant has a Time Table used for the Automatic Switching mode. The Start and/or
End time of each mode can be set for each day of the week. The Time Table numbers
correspond to the tenant numbers respectively.
Type Description
Automatic The PBX will switch mode according to the preprogrammed Time
Table.
Manual A manager, or preprogrammed extension on a COS basis ( Time
Service Manual Switching [514]) can switch mode by dialling the
feature number or pressing the Time Service button.