Peerless Industries KX-TDA15 - Manual (Page 68)

1.4 Answering Features
68 Feature Guide
1.4.1.3 Call Pickup
Description
An extension user can answer a call ringing at any other extension.
The following types are available:
Call Pickup Deny:
Preventing other extensions from picking up calls ringing at your extension is also possible.
Conditions
• Call Pickup applies to:
Intercom, trunk, and doorphone calls
• Internal Call Block
An extension which cannot call certain extensions on a COS basis (
1.1.2.2 Internal Call
Block) also cannot pick up any calls ringing at those extensions.
[Directed Call Pickup]
• A user can also pick up a specified extension’s call (except an ISDN extension’s call and
broadcasting call) by pressing the corresponding DSS button. COS programming
determines the extensions that can use this feature.
The light pattern of a DSS button for an incoming call to an extension or incoming call
distribution group can be programmed through system programming. Call Pickup is
available only when the DSS button is red flashing.
[Group Call Pickup]
• A specified number of call pickup groups can be created ( User Groups of a Pickup
Group [650]), each of which consists of user groups. One user group can belong to several
call pickup groups. (
2.2.2 Group)
[Example]
User Manual References
User Manual
1.3.3 Answering a Call Ringing at Another Telephone (Call Pickup)
Type Picking up Call Type
Directed A specified extension’s call.
Group A call within a specified call pickup group.
User Group 1
Call Pickup Group 1
Extn. 100 Extn. 101
User Group 2
Extn. 102 Extn. 103
User Group 3
Extn. 104 Extn. 105
Call Pickup Group 2 Call Pickup Group 3
User Group 4
Extn. 106 Extn. 107