Peerless Industries KX-TDA15 - Manual (Page 90)

1.6 Memory Dialling Features
90 Feature Guide
1.6.1.4 Last Number Redial
Description
Every extension automatically saves the last external telephone number dialled to allow the
same number to be dialled again.
Automatic Redial:
If Last Number Redial is performed in hands-free mode and the called party is busy, redialling
will be automatically retried a preprogrammed number of times (
Automatic Redial Repeat
Times [205]) at preprogrammed intervals ( Automatic Redial Interval [206]). The Redial Call
No-answer Ring Duration time is programmable.
This feature is available only on certain PT models which have the SP-PHONE button.
Outgoing Call Log:
The last five dialled numbers are automatically stored at each extension. A display PT user can
redial easily any of the stored numbers.
Conditions
• The memorised telephone number is replaced by a new one.
• If any dialling operation is done or an incoming call is answered during Automatic Redial,
Automatic Redial is cancelled.
• Automatic Redial is not available for some countries/areas when using an analogue trunk.
• Interrupt Redial
When the called party or the seized trunk is busy, it is possible to press the REDIAL button
continuously until the called party or the trunk becomes idle. There is no need to go off-
hook, before pressing the REDIAL button.
• Outgoing Call Log Display by REDIAL Button
Pressing the REDIAL button on a display DPT while on-hook can display the Outgoing Call
Log. System programming is required for this operation.
User Manual References
User Manual
1.2.3 Redial
1.11.1 Using the Call Log