Panasonic AJ- DCP - Manual (Page 16)

Operations
16
Linear 0.3a a speed playback
Pressing the SEARCH button when in play pause
status causes the mode to switch to slow still.
In this status, pressing the FF button or REW button
causes operation to switch to linear 0.3a playback.
Pressing the PAUSE/STILL button during linear 0.3a
playback causes the tape to pause.
Pressing the PAUSE/STILL button a second time
causes linear 0.3a playback to resume.
<Note>
O
Noise appears during linear 0.3a speed playback.
When the optional AJ-A95P remote controller is
connected to the REMOTE connector, variable speed
playback is enabled by operating the search dial on
the AJ-A95P.
<Notes>
O
Noise appears on the screen during playback at
any tape speed except the normal tape speed (1a).
O
During variable speed playback, the sound
recorded on the analog cue track is played back.
Variable speed playback
(When AJ-A95P is connected)
Next VTR operation
VTR
operating mode
Button pressed
PAUSE/STILL Play pause Play
PLAY Play
STOP Stop
All modes
STOP FF Fast forward
STOP REW Rewind
All modes
PAUSE/STILL or
PLAY
Play
SEARCH Slow still
Play pause
PLAY Play
FF Forward slow Slow still
REW Reverse slow
PAUSE/STILL,
SEARCH or FF
Forward slow
REW Reverse slow
Forward slow still
PAUSE/STILL,
SEARCH or REW
Reverse slow
FF Forward slow
Reverse slow still
REW Reverse slow
SEARCH or
PAUSE/STILL
Forward slow still
Forward slow
FF Forward slow
SEARCH or
PAUSE/STILL
Reverse slow still
Reverse slow