Panasonic AJ- DCP - Manual (Page 35)

35
600 OUT VSYNC
0000
0001 N-VF
VF
For setting whether to float the vertical sync position of the video output in
order to input the video output phase during E-E mode recording.
0: Vertical sync position is not floated.
1: Vertical sync position is floated.
601 V-MUTE SEL
0000
0001 N-MUTE
LOW RF
For setting whether to mute the video signals when LOW RF or NO RF has
occurred during playback.
0: The video signals are not muted (the picture is frozen).
1: The video signal picture is muted (the screen goes blank).
602 CC (F1) BLANK
0000
0001 BLANK
THRU
For setting ON or OFF for the closed caption signals in field No.1.
0: Signals are forcibly blanked.
1: Signals are not blanked.
603 CC (F2) BLANK
0000
0001 BLANK
THRU
For setting ON or OFF for the closed caption signals in field No.2.
0: Signals are forcibly blanked.
1: Signals are not blanked.
604 FREEZE SEL
0000
0001
0002 FIELD1
FIELD2
FRAME
For setting the freeze mode of still pictures.
0: Field freeze (field No.1)
1: Field freeze (field No.2)
2: Frame freeze
606 INPUT C KILL
0000
0001 B/W
AUTO
For setting the color killer processing for the video input signals.
0: The video signals are forcibly set to the black-and-white mode.
1: The video signals are processed automatically.
622 SETUP 25 For setting 7.5% setup processing to be performed on input and output
signals in the 25 Mbps mode.
(The 00 and 01 settings on the submenu can be displayed by pressing the
MODE button.)
607 IN FRM DET
0000
0001 FORCED
AUTO
For setting frame detection processing during input.
0: Frame detection is performed all the time.
1: Frame detection is prohibited when non-standard color signals are input.
00 CMPST IN
0000
0001 THRU
CUT
This selects the 7.5% setup processing for the input composite signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
01 CMPST OUT
0000
0001 THRU
ADD
This selects the 7.5% setup processing for the output composite signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.
623 SETUP 50 For setting 7.5% setup processing to be performed on input and output
signals in the 50 Mbps mode.
(The 00 and 01 settings on the submenu can be displayed by pressing the
MODE button.)
00 CMPST IN
0000
0001 THRU
CUT
This selects the 7.5% setup processing for the input composite signal.
0: The signal is recorded in its original form.
1: The signal is recorded with the 7.5% setup removed.
01 CMPST OUT
0000
0001 THRU
ADD
This selects the 7.5% setup processing for the output composite signal.
0: The signal is output in its original form.
1: The signal is output with the 7.5% setup added.
605 EDH
0000
0001 OFF
ON
For setting whether to superimpose EDH onto the serial output.
(This function works when the optional SDI input/output board has been
installed. When it has not been installed, “N/A” is displayed, and the
function does not work.)
0: EDH is not superimposed.
1: EDH is superimposed.
VIDEO menu
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining indicates the factory setting.
Setup Menus