Panasonic AJ- DCP - Manual (Page 27)

27
SYSTEM menu
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
00 ENCODER SEL
0000
0001 REMOTE
LOCAL
For setting whether the encoder adjustments (for the analog video output
signals) are to be performed by the external encoder remote controller or
the unit.
0: Adjustments are performed by the external encoder remote controller.
1: Adjustments are performed by the unit.
The underlining indicates the factory setting.
01 VIDEO LEVEL 0000
0128
0255
–128
0
127
For setting the video level as part of the encoder adjustments performed by
the unit.
Maximum variation range: ±3 dB
02 SET UP 0000
0128
0255
–128
0
127
For setting the setup amount as part of the encoder adjustments performed
by the unit.
Maximum variation range: 10 IRE
03 HUE 0000
0128
0255
–128
0
127
For setting the hue as part of the encoder adjustments performed by the
unit.
Maximum variation range: ±25 degrees
04 CHROMA LEVEL 0000
0128
0255
–128
0
127
For setting the chroma level as part of the encoder adjustments performed
by the unit.
Maximum variation range: ±3 dB
05 SYSTEM H 0000
0255
–128
127
For setting the horizontal phase as part of the encoder adjustments
performed by the unit.
Maximum variation range: ±8 µs
07 SC FINE 0000
0255
–128
127
For finely adjusting SC PHASE as part of the encoder adjustments
performed by the unit.
Maximum variation range: ±45 degrees
Together with the SC COARSE adjustment, 360 degrees are covered.
06 SC COARSE 0000
0001
0002
0003 0
90
180
270
For coarsely adjusting SC COARSE as part of the encoder adjustments
performed by the unit.
Variation range: 4 positions of 90 degrees each
08 SCH COARSE 0000
0001
0002
0003 0
90
180
270
For coarsely adjusting SCH.
Variation range: 4 positions of 90 degrees each
<Notes>
O
Item No. 01, 02, 03 and 04 are initialized only when “ALL” is selected for the initialization operation.
O
The ( ) setting items are not initialized by the regular menu resetting operation.
Setup Menus