Paradyne 3161-B3 - Manual (Page 263)

H. Asynchronous Terminal Operation
3160-A2-GB21-90 February 2001 H-7
Setting Customer Identification
The customer identification is used to uniquely identify the DSU/CSU.
Procedure
To change the customer identification (Customer ID):
1. From the Main Menu screen, select Control.
The Control screen appears.
2. From the Control screen, select Customer ID.
The Customer ID screen appears ( Figure H-3, Customer Identification
Screen ).
3. Use the Customer ID field to set the customer identification.
The customer identification may be up to 8 characters long.
Select Clear to remove all the characters in the associated field.
4. Select Save to store the information in nonvolatile memory.
In addition to the customer identification, you may also enter a system name,
system location, and system contact. Although only 40 characters are displayed
for these fields, you may enter up to 255 characters. The fields scroll as the
additional characters are added.
Figure H-3. Customer Identification Screen
main/control/customer id
Customer ID: Node A Model: 31xx
Slot: xx
CUSTOMER ID
Customer ID: Clear
System Name: Clear
System Location: Clear
System Contact: Clear
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Customer
Identification
Field