Paradyne 3161-B3 - Manual (Page 269)

H. Asynchronous Terminal Operation
3160-A2-GB21-90 February 2001 H-13
Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on a Port on page H-12), the password itself is set.
Unless you specify otherwise, the password is null.
Procedure
To set a password:
1. From the Main Menu screen, select Control.
The Control screen appears.
2. From the Control screen, select Administer Password.
The Password Entry screen appears ( Figure H-9, Setting a Password ).
This screen is used to add a new password or modify an existing password.
3. Enter a new password in the Password field.
The password may be 1 to 8 characters long and may contain the characters 0
through 9, a through z, and/or A through Z.
4. Use the Re-Enter Password field to verify the new password.
5. Select Save.
Once a password is saved, the Login Records Saved message appears at the
bottom of the screen.
Figure H-9. Setting a Password
main/control/admin_password
Customer ID: Node A Model: 31xx
Slot: xx
PASSWORD ENTRY
Password:
Re-Enter Password:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Save
Password
Enter New
Password
Re-enter
Password