Panasonic CF-52 Series - Manual (Page 10)

10
Sleep or Hibernation Functions
„ To enter sleep or hibernation
1
Close the display, or press the power switch (A) until a beep
*1
sounds.
Sleep: The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.
z
You can alternatively use the Windows menu to enter sleep or hibernation.
Click
(Start) - - [Sleep] / [Hibernate].
CAUTION
While the computer is entering sleep or hibernation
z Do not:
• Touch the keyboard, touch pad, touchscreen (only for model with touchscreen) or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Operate the wireless switch.
• Close or open the display.
• Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (sleep) or goes off (hibernation).
z It may take 1 or 2 minutes to enter sleep or hibernation. Do not touch any key though the screen becomes dark.
z At the beep
*1
, immediately release the power switch. After releasing the switch, do not operate it until the power indi-
cator blinks or goes off. If you press and hold the power switch for longer than 4 seconds, the computer will forcibly
shut down and unsaved data will be lost even if you have set [When I press the power button] to any item in [Change
what the power button does].
*1 If the speakers are muted, beeps do not sound.
In sleep or hibernation
z Do not attach or remove a multimedia pocket device and peripheral devices. Doing so may cause malfunction.
z Power is consumed in sleep. Power consumption may increase when a PC Card is inserted. When power is
exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the sleep function.
z Do not turn on/off the wireless switch.
Entering/Resuming from Sleep or Hibernation