Hard disk drive, Inserting/removing the hard disk drive – Panasonic CF-52 Series User Manual
Page 71
71
Hard Disk Drive
To change your hard disk drive, contact Panasonic Technical Support.
CAUTION
z
Back up all the important data before removing the hard disk drive.
z
If you need to read the hard disk data on another computer for repair or any other purpose, set [Hard Disk Lock] to
[Disabled] in the [Security] menu of the Setup Utility
(
) before removing the hard disk drive.
z
Carefully remove/insert the hard disk drive since the hard disk drive is extremely sensitive to shock. Note that static
electricity may affect some internal components.
1
Turn off the computer and disconnect the AC adaptor.
z
Do not use sleep or hibernation.
2
Remove the battery pack (
).
3
Insert/Remove the hard disk drive.
z
To remove
Slide and hold the latch (A), and slide the cover (B) carefully.
The hard disk drive is attached behind the cover.
z
To insert
Insert the hard disk drive until it clicks.
4
Insert the battery pack (
CAUTION
z
Confirm that the latch is surely locked so that the hard disk drive does not fall when you carry the computer.
z
Be sure to attach the hard disk drive for use.
NOTE
z
You can erase the data before changing the hard disk drive (
).
z
You can check that the hard disk is recognized or not in the [Information] menu of the Setup Utility (
). If the
hard disk is not recognized, turn off the computer and insert it again.
Inserting/Removing the Hard Disk Drive
A