Panasonic CF-52 Series - Manual (Page 86)

86
Hard Disk Backup/Restore Function
6
Click [Restart].
z The computer will restart.
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User
Password.
7
Click [Next].
Do not specify keyboard layouts other than the one already selected.
8
If [Windows cannot find a system image on this computer] appears, connect to this unit
the storage media (e.g. external hard disk) on which the system image has been backed
up, and then click [Retry].
9
Click [Next].
Follow the on-screen instructions.
„ Start up System Recovery Options
z To perform from [Advanced Boot Options]
A Turn on the computer, and when [Panasonic] boot screen disappears, press and hold F8.
z
If [Enter Password] is displayed during the following procedure, input the Supervisor Password or the User Password.
B Release your finger when [Advanced Boot Options] is displayed.
C Press П Р to select [Repair Your Computer] and press Enter.
[System Recovery Options] appears.
D Click [Next].
• Do not specify keyboard layouts other than the one already selected.
E Select the user name registered on Windows.
F Input the password, then click [OK].
z To perform from the Product Recovery DVD-ROM for Windows 7.
A Turn off the computer and insert the CD/DVD drive into the multimedia pocket ( Î page 23 ).
B Turn on the computer, and press F2 or Del while [Panasonic] boot screen is displayed.
• The Setup Utility starts up.
• If the password is requested, enter the Supervisor Password.
C Write down all of the contents of the Setup Utility and press F9.
• At the confirmation message, select [Yes] and press Enter.
D Press F10.
• At the confirmation message, select [Yes] and press Enter.
• The computer will restart.