Panasonic CF-52 Series - Manual (Page 48)

48
Fingerprint Reader
<Only for model with Fingerprint Reader>
.
NOTE
z Enrollment and authentication is unavailable to an extremely minority of people including those whose fingerprints give
little data for personal identification.
How to Use the Fingerprint Reader
This section explains how your fingerprints are enrolled and authenticated.
1
Slide your finger toward yourself.
z To prevent a reading error.
A Set the first joint of your index finger on the sensor as illustrated to the right.
B Slide your finger toward yourself while keeping it in contact with the fingerprint sensor.
C Slide your finger down until the sensor is visible.
z When the fingerprint sensor does not enroll or authenticate your fingerprint properly:
• You slid your finger too fast or too slow.
• Your finger was soiled or it has a scar on the surface.
• Your finger was wet or extremely dry.
• Your fingerprint does not have sufficient data for personal identification.
For further information, refer to “Fingerprint Reader ” (
Î page 99 ).
Fingerprint Reader
Fingerprint sensor