Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 34)

3 Push MULTI-CONTROL up or down to
select a pairing assignment.
P1 (user phone 1)
—P2 (user phone 2)—P3
(user phone 3)
# Push MULTI-CONTROL left or right to switch
the BD address and device name.
# If the assignment is empty, NO DATA is dis-
played and operation is not possible.
4 When the device name is being dis-
played, push MULTI-CONTROL right to se-
lect DELETE YES.
DELETE YES is displayed. Deleting phone is
now on standby.
# If you do not want to delete the phone, push
MULTI-CONTROL left. The display reverts to nor-
mal.
5 Press MULTI-CONTROL to delete the
phone.
After the phone is deleted,
DELETED is dis-
played.
Making a phone call
Dial a number
The most basic way to make a call is to simply
dial the number.
Refer to Making a call by entering phone num-
ber on page 42 for detailed instructions.
Calling a number in the Phone Book
or the Call History
Refer to Calling a number in the phone book on
page 36 and Using the call history on the next
page for detailed instructions.
Preset number
Numbers that you dial frequently can be as-
signed to presets for quick recall.
Refer to Using preset numbers on page 37 for
how to assign a number to a preset.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
! This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
1 Press BAND and hold until VOICE DIAL
appears in the display.
When
VOICE DIAL ON is displayed, voice re-
cognition function is ready.
# If your cellular phone does not feature voice
recognition function,
NO VOICE DIAL appears in
the display and operation is not possible.
2 Pronounce the name of your contact.
Taking a phone call
Answering or rejecting an incoming call
% Answering an incoming call
When a call comes in, press
MULTI-CONTROL.
# You can also take a phone call by pressing
OFF HOOK on the remote control.
% End a call
Press
.
# You can also end the call by pressing
ON HOOK on the remote control.
% Rejecting an incoming call
When a call comes in, press
.
# You can also reject an incoming call by press-
ing
ON HOOK on the remote control.
% Put the call on hold
Press
MUTE while talking on the phone.
Operating this unit
En
34
Section
02