Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 54)

Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit
’s owner’s manual.
% Press BAND.
% Press and hold BAND.
% Push MULTI-CONTROL left or right.
% Push and hold MULTI-CONTROL left or
right.
% Push MULTI-CONTROL up or down.
% Press any of 1 to 6 on the remote con-
trol.
Advanced operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
FUNCTION1 (function 1)
—FUNCTION2 (func-
tion 2)
—FUNCTION3 (function 3)—
FUNCTION4 (function 4)
—AUTO/MANUAL
(auto/manual)
# You can also turn FUNCTION1 on or off by
pressing
PGM on the remote control.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press
BAND.
Turning the clock display
on or off
You can turn the clock display on or off.
! Even when the sources and the feature
demo are off, the clock display appears on
the display.
% Press CLOCK to turn the clock display
on or off.
Each press of
CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 4 seconds.
Switching the display
indication and button
illumination
Display indication and button illumination can
be switched on or off.
% Press and hold DISP OFF.
Pressing and holding
DISP OFF switches the
display indication and button illumination on
or off.
# While the display indication is turned off,
CLOCK/DISP OFF button lights up.
# Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.
Using the PGM button
You can operate the preprogrammed functions
for each source by using
PGM on the remote
control.
% Press PGM to turn pause on when se-
lecting the following sources:
! COMPACT DISC – Built-in CD player
! MULTI CD – Multi-CD player
Other Functions
En
54
Section
05