Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 65)

Multi-CD Player
Basic Operations
You can use this unit to control a multi-CD
player, which is sold separately.
! Only functions described in this manual are
supported by 50-disc multi-CD players.
! This unit is not designed to operate disc title
list functions with a 50-disc multi-CD player.
For information about the disc title list func-
tions, refer to Selecting discs from the disc
title list on page 68.
1 Disc number indicator
2 Track number indicator
3 Play time indicator
% Select a disc
Push
MULTI-CONTROL up or down.
# You can also select a disc by using 1 to 6 but-
tons on the remote control.
! For discs 1 to 6, press the corresponding
button number.
! For discs 7 to 12, press and hold the corre-
sponding numbers, such as 1 for disc 7,
until the disc number appears in the dis-
play.
% Fast forward or reverse
Push and hold
MULTI-CONTROL left or right.
% Select a track
Push
MULTI-CONTROL left or right.
Notes
! When multi-CD player completes preparatory
operations, READY is displayed.
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner
’s
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
Using CD TEXT functions
You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the built-
in CD player.
Refer to Displaying text information on disc on
page 17.
Introduction to advanced
operations
You can only use COMPRESSION (compres-
sion and DBE) with a multi-CD player that sup-
ports them.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
PLAY MODE (repeat play)
—RANDOM MODE
(random play)
—SCAN MODE (scan play)—
PAUSE (pause)
—COMPRESSION (compres-
sion and DBE)
—ITS PLAY MODE (ITS play)—
ITS MEMO (ITS programming)
—TITLE INPUT
(disc title input)
# If you do not operate functions other than
ITS MEMO and TITLE INPUT within about 30 sec-
onds, the display automatically returns to the or-
dinary display.
# When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot switch to
TITLE INPUT. The disc title is already recorded on
the CD TEXT disc.
Available accessories
En
65
Section
06
A
vailable
accessories