Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 40)

! DEVICE INFO is the same as that of the Blue-
tooth audio. (Refer to Displaying BD (Bluetooth
Device) address on page 29.)
! PH. B. NAME VIEW (phone book name view)
cannot be selected for cellular phone regis-
tered guest phone.
! If cellular phone is connected to this unit via
Bluetooth wireless technology with HFP
(Hands-Free Profile), PBAP (Phone Book Ac-
cess Profile) and SPP (Serial Port Profile),
PH BOOK DOWNLOAD can be operated.
! If you do not operate functions other than
PH BOOK DOWNLOAD,
PH BOOK TRANSFER, and NUMBER DIAL
within about 30 seconds, the display automati-
cally returns to the ordinary display.
Downloading phone books
from your cellular phone
Phone books in your cellular phone can be
downloaded and stored in this unit.
! Depending on the cellular phone, you can-
not use this function.
! 400 entries for each user (max. 3 users) can
be stored in the phone book. Each indepen-
dent entry can hold three phone numbers
and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
PH BOOK DOWNLOAD.
3 Press MULTI-CONTROL to enter in the
phone book download standby mode.
Phone book downloading starts automatically.
# The display indicates how many entries have
been transferred and the total number to be
transferred.
# If the ID and the password are requested, refer
to Entering the ID and the password on this page.
4 DATA DOWNLOADED is displayed and
phone book download is completed.
Entering the ID and the password
If the ID and the password are requested, read
the following instructions to enter the ID and
the password.
! Up to 20 characters can be entered for the
ID and up to 16 characters can be entered
for the password.
1 Press DISP to switch between alphabet
and numbers.
Press
DISP repeatedly to switch between the
following character types:
Alphabet
—Numbers and symbols
2 Push MULTI-CONTROL up or down to
select a letter.
3 Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
4 Press MULTI-CONTROL to determine
the ID and the password.
5 After entering the ID and password,
use your cellular phone to continue the
procedure.
Transferring entries to the
phone book
Phone books in your cellular phone can be
transferred to this unit by using your cellular
phone.
! 400 entries for each user (max. 3 users) can
be stored in the phone book. Each indepen-
dent entry can hold three phone numbers
and genres.
1 Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Use MULTI-CONTROL to select
PH BOOK TRANSFER.
3 Press MULTI-CONTROL to enter the
phone book transfer standby mode.
Operating this unit
En
40
Section
02