Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 60)

Selecting a SIRIUS channel directly
When using the remote control, you can select
the SIRIUS channel directly by entering the de-
sired channel number.
1 Press DIRECT.
Channel number input display appears.
2 Press 0 to 9 to enter the desired channel
number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The SIRIUS channel of entered number is
selected.
# After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
Switching the SIRIUS display
% Press DISP to switch the SIRIUS display.
Each press of
DISP changes the SIRIUS dis-
play in the following order:
Play time
—Channel number—Channel name
—Category name—Artist name—Song title/
program title
—Composer name
# Play time is displayed during the Instant Re-
play mode. Refer to Using Instant Replay function
on page 62.
# Play time display indicates the time inverted
from the live broadcast. Play time is displayed in
negative number.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Only the remote control can operate this
function.
! Six stations for each band can be stored in
memory.
% When you find a station that you want
to store in memory press one of preset tun-
ing buttons 1 to 6 and hold until the SIRIUS
preset number stops flashing.
The number you have pressed will flash in the
SIRIUS preset number indicator and then re-
main lit. The selected station has been stored
in memory.
The next time you press the same preset tun-
ing button the station is recalled from mem-
ory.
# You can also recall stations assigned to preset
tuning numbers by pushing
MULTI-CONTROL up
or down.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
3 Turn MULTI-CONTROL to select the
function.
CHANNEL MODE (channel select mode set-
ting)
—GAME ALERT (game alert setting)—
TEAM SETTING (team setting)
—GAME INFO
(game info)
—PAUSE (pause)
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the ordinary display, press BAND.
! If you do not operate functions within about
30 seconds, the display is automatically re-
turned to the ordinary display.
! During the Instant Replay mode, you can se-
lect PAUSE (pause). Refer to Using Instant Re-
play function on page 62.
! PAUSE is the same as that of the built-in CD
player. (Refer to Pausing playback on page 19.)
Available accessories
En
60
Section
06