Pioneer SUPER TUNER III D FH-P8000BT - Manual (Page 67)

5 Push MULTI-CONTROL up to store the
currently playing track in the playlist.
MEMORY COMPLETE is displayed and the
currently playing selection is added to your
playlist.
6 Press BAND to return to the playback
display.
Note
After data for 100 discs is stored in memory, data
for a new disc will overwrite the oldest one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player begin to play.
1 Select the repeat range.
Refer to Playing tracks in random order on
page 19.
2 Display the function menu.
Refer to Introduction to advanced operations
on page 65.
3 Use MULTI-CONTROL to select
ITS PLAY MODE in the function menu.
4 Press MULTI-CONTROL to turn ITS play
on.
ITS PLAY appears in the display. Playback be-
gins of those tracks from your playlist within
the previously selected
M-CD REPEAT or
DISC REPEAT ranges.
# If no tracks in the current range are pro-
grammed for ITS play, then
ITS EMPTY is dis-
played.
# To turn ITS play off, press MULTI-CONTROL
again.
Erasing a track from your ITS playlist
You can delete a track from your ITS playlist if
ITS play is on.
If ITS play is already on, skip to step 2. If ITS
play is off, use
MULTI-CONTROL.
1 Play the CD with the track you want to
delete from your ITS playlist, and turn ITS
play on.
Refer to Playback from your ITS playlist on this
page.
2 Display the function menu.
Refer to Introduction to advanced operations
on page 65.
3 Use MULTI-CONTROL to select
ITS MEMO in the function menu.
4 Select the desired track by pushing
MULTI-CONTROL left or right.
5 Push MULTI-CONTROL down to erase
the track from your ITS playlist.
The currently playing selection is erased from
your ITS playlist and playback of the next track
begins.
# If there are no tracks from your playlist in the
current range,
ITS EMPTY is displayed and nor-
mal playback resumes.
6 Press BAND to return to the playback
display.
Erasing a CD from your ITS playlist
You can delete all tracks of a CD from your ITS
playlist if ITS play is off.
1 Play the CD that you want to delete.
Push MULTI-CONTROL up or down to select
the CD.
2 Display the function menu.
Refer to Introduction to advanced operations
on page 65.
3 Use MULTI-CONTROL to select
ITS MEMO in the function menu.
Available accessories
En
67
Section
06
A
vailable
accessories