Powerware 9125 Two-in-One UPS 2500 - Manual (Page 60)

UPS MAINTENANCE
EATON Powerware ® 9125 Two-in-One UPS (2500/3000 VA) User’s Guide S 164201374 Rev D
www.powerware.com
54
4. Unscrew and set aside the battery retaining bracket (see Figure 43).
Battery Retaining Bracket
Figure 43. Removing the Battery Retaining Bracket
5. Pull the battery trays out onto a flat, stable surface (see Figure 44).
See “Recycling the Used Battery or UPS” on page 57 for proper
disposal.
Figure 44. Removing the Battery Trays
6. Slide the new battery trays into the UPS.
The battery trays are keyed to prevent improper connection. The
battery tray with the battery cable goes in the bay to the right.
7. Reinstall the battery retaining bracket removed in Step 4.
8. Reconnect the battery cable. Secure the cable to the battery
retaining bracket with a tie wrap.
9. Snap the LED panel into place.
10. Replace the UPS front cover.